Multifunctional 1-channel actuator to activate/deactivate lights or other appliances (230 V ~). With integrated logic module, comfort and timer functions, power measurement and short circuit detection and notification (1 × 400 W).
To Favourites
Question about the product
Технически данни
Description - frogblue actuator - frogAct1-0
Product characteristics:
- Short-circuit protection
- Temperature cut-out (>75 °C)
- Switch status feedback
- Parametrisable switch on and switch off times
- Switch on and switch off delay
- Mains supply via power cable, no additional cabling required between frogblue modules.

Intended use:
For assembly in device sockets according to DIN 49073. Socket depth minimum 53 mm when installed behind switch insert, individual installation is required at lower depth.

System information:
This device is a product of the frogblue system. Detailed technical expertise obtained through frogblue training sessions is a prerequisite. The functionality of the device depends on the software. Detailed information regarding software versions and the respective range of functions can be found on the frogblue website. Technical descriptions, additional detailed instructions as well as notes, information regarding proper disposal can be found in the manual, which is available on the frogblue website. Commissioning and configuration will be executed using the frogblue app.

Safety information:
Electrical devices may only be installed and assembled by qualified, skilled electricians. Failure to observe the instructions can cause damage to the device and result in fire and other hazards. Danger caused by electric shock. Device is not suitable for disconnection from power voltage. Even when the device is turned off, the load is not electrically isolated from the mains. Before starting work on the device or replacing light sources, always disconnect the power supply and switch off the circuit breakers. Country-specific regulations must always be observed.
Article No.
Be the first to review this product!
Технически данни


Category Frogs
Article description frogAct1-0
Article number A1-0-400.01
Type of mounting Recess-mounted (in power socket)
Functions and power  
Inputs -
Outputs 1 (AC 110–240 V ~)
Outputs can be dimmed No
Min. load LED 3W
Max. power per output 400 W/400 VA (220−240 V ~)
200 W/200 VA (110−219 V ~)
Suitable loads Light bulb load, electronic transformer, inductive load
Output modes Switch
Protection category Conforms to IP20
Integrated logic module Yes
Integrated configuration backup Yes
Comfort and timer function Yes
Power measurement Yes
Short circuit detection and notification Yes
Electricity supply  
Mains voltage AC 110–240 V ~
Mains frequency 50 / 60 Hz
Stand-by consumption < 220 mW
Dimensions and weight  
Dimensions (L x W x H) 53 x 48 x 21 mm
Weight 30 g
Bluetooth Bluetooth 4.2 Low Energy
Typical open field range 30 metres
Operation and storage  
Ambient temperature −25° to +50°C
Storage temperature −25° to +70°C
Air humidity (during operation) (Non-condensing)
Power connection  
Type of contact ε, MOSFET
Connection options 230 V ~ − doorbell, lamps, power sockets etc.
Connection type Spring-type terminal (single wire)
Lead cross-section 1 to 1.5 mm²
Stripping length 8 mm
Package size 1 piece, 10 pieces
EAN 1 piece 4260578530163
Packaging dimensions (L x W x H), 1 piece 75 x 30 x 75 mm
Weight including packaging, 1 piece 50 g
EAN 10 pieces 4260578530170
Packaging dimensions (L x W x H), 10 pieces 78 x 80 x 316 mm
Weight including packaging, 10 pieces 550 g
WebShop System