frogAct1-1

NEW
frogAct1-1
frogAct1-1
frogAct1-1
frogAct1-1
frogAct1-1
frogAct1-1
frogAct1-1
frogAct1-1

Multifunctional 1-channel actuator with one input to activate/deactivate lights or other appliances (230 V ~). With integrated logic module, comfort and timer functions, power measurement and short circuit detection and notification (1 × 400 W).

Bluetooth LE
104.94
To Favourites
Recommend
Print
Comparison
Question about the product
Details
Info
Opinions
SPECIFICATIONS
Details

Description

The small green control modules, called frogs, are the heart of every frogblue system and form the basis of the Bluetooth®-based smart building solution from frogblue. Our frogs can switch, dim, measure, open doors or react to buttons, switches and window contacts.

 

Connected to the mains or battery-powered, they are linked together with “virtual cables” via the frogblue Bluetooth® mesh network. They forward messages and thus extend the range. Data transfer between the frogs is always encrypted (128 bit), and this in addition to Bluetooth®. frogs are smart, packed with innovative functions, are very easy to configure and do not require a central unit or control cabinet. With a power consumption of just 0.2 watts, they are also extraordinarily energy-conscious.

 

Installed in a deep flush-mounted back box (recommended socket depth: 63 mm) behind any conventional switch/button, junction box, weatherproof outdoor socket or lamp outlet, this multifunctional 1-channel actuator can be used to control the lights or other appliances.

 

For example, with this frog and another frog as an input module, e.g. the frogIn3-AC, outside lighting can be flexibly switched from indoors via 3 inputs (buttons or switches) without additional infrastructure. Supplied with power and connected to the corresponding lamp, a lighting circuit with up to 400 W can be controlled via the 1 output of the frogAct1-0. Any external sensors, such as a motion detector, can be connected to its input (230 V). If the motion detector triggers, all spotlights equipped with frogs are wirelessly switched on for a preselected time. Short flashes from one of the spotlights indicate the area where motion was detected.

 

The frogs can be controlled with the frogblue HomeApp via smartphone or tablet (iOS and Android), frogDisplay, frogKey or simply via the conventional switch/button connected to a frog. We always recommend buttons, as the full range of functions can be used with individual and different touch patterns, such as double or triple clicks, etc.

 

Product characteristics

  • Short-circuit protection

  • Temperature cut-out (>75 °C)

  • Switch status feedback

  • Configurable switch on and switch off times

  • Switch on and switch off delay

  • Mains supply via power cable, no additional cabling required between frogblue modules.

  • Intended use

  • For assembly in device sockets according to DIN 49073. Socket depth minimum 53 mm when installed behind switch insert, individual installation is required at lower depth. A socket depth of 63 mm is recommended.

 

System information

This device is a product of the frogblue system. Detailed technical expertise obtained through frogblue training sessions is a prerequisite. The functionality of the device depends on the software. Detailed information regarding software versions and the respective range of functions can be found on the frogblue website. Technical descriptions, additional detailed instructions as well as notes, information regarding proper disposal can be found in the manual, which is available on the frogblue website. Commissioning and configuration will be executed using the frogblue app.

 

Safety information

Electrical devices may only be installed and assembled by qualified, skilled electricians. Failure to observe the instructions can cause damage to the device and result in fire and other hazards. Danger caused by electric shock. Device is not suitable for disconnection from power voltage. Even when the device is turned off, the load is not electrically isolated from the mains. Before starting work on the device or replacing light sources, always disconnect the power supply and switch off the circuit breakers. Country-specific regulations must always be observed.

Info
Manufacturer
frogblue
Article No.
frogAct1-1
Product status
NEW    
Opinions
SPECIFICATIONS

Function & Performance

 

Inputs

1 (AC 110–240 V~)

Outputs

1 (AC 110–240 V ~)

Outputs dimmable

No

Minimum Load LED

LED 3 W

Maximum Power per output

400 W/400 VA (220–240 V~) / 200 W/200 VA (110–219 V~)

Suitable loads

Light bulb load, electronic transformer, inductive load, (no motor load)

Output modes

Switch

Certifications

VDE Test Mark Certifications

Integrated logic module

Yes

Integrated configuration backup

Yes

Comfort and timer functions

Yes

Power measurement

Yes

Short circuit detection and notification

Yes

Size and Weight

 

Dimensions (L x B x H)

53 x 48 x 21

Power supply

 

Mains voltage

AC 110–240 V~

Stand-by consumption

< 220 mW

Network

 

WLAN

No

Bluetooth®

Bluetooth® 4.2 Low Energy

Frequency range

2400–2483,5 MHz max. 3,5 dBm

Typical radio open field range

30 Meter

Operation & Storage

 

Ambient temperature

–25°C bis +50°C

Storage temperature

–25°C bis +70°C

Air humidity (during operation)

(Non-condensing)

Connection

 

Type of contact

ε, MOSFET

Connection variants

for bell, lamps, buttons, switches

Connection type

Spring-type terminal (single wire)

Core cross-section

1 - 1,5 mm2 (rigid ladder recommended)

Stripping length

8 mm

Packaging

 

Packaging size

1 unit, 10 units

EAN 1 unit

4260578530163

Packaging dimensions (L x B x H) 1 Stück

75 × 30 × 75 mm

Weight including packaging 1 unit

36 g

Weight including packaging, 10 pieces

421 g

Mounting Type

 

Mounting type

Flush-mounted (in device box according to DIN 49073)

Material data

 

Weight

24 g

Technical data

 

Degree of protection

Conforms to IP20

Mains frequency

50 / 60 Hz

WebShop System
paypal