FIBARO Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery or VDC powered. Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact.
The device has built in temperature sensor, monitoring temperature of e.g. floor. Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in visual LED indicator and acoustic alarm. LED diode signals flood, operating mode or the Z-Wave network communication range.
In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location.
FIBARO Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.
Compatible with any Z-Wave or Z-Wave+ Controller,
Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
Advanced microprocessor control,
Active power and energy metering functionality,
Works with various types of switches – momentary, toggle, three-way, etc,
To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
FIBARO Switch 2 is an extension unit.